Unchecking the time sync only reduces the dropouts. You need to also uncheck the location sync in the Time Zone tab, but even then you're only reducing the dropouts. Any time the T2 chip tries to sync, it will overload the USB2.0 bus, causing dropouts. There is no way any musician should go on stage with a 2018 [Mac] and a USB2.0 audio interface directly connected to it. The only solutions are 1) Get a Thunderbolt or USB3.0 audio interface, or 2) Use a Certified Thunderbolt 3 powered hub (not a bus-powered or cheap non-certified hub) - Cable Matters has a solution for $169 on Amazon, but most of those hubs are at least $200-300. Using a certified TB3 hub creates a separate external USB2.0 bus, in which you can run your USB2.0 audio interface. The cheap hubs do not work because they don't run on the TB3 bus, and therefore they don't create their own separate USB2.0 bus, which means you're going to get dropouts.
Trouwens, gebruik jij een externe audio interface?
Gewoon de interne linkerspeaker, dus zonder tussenkomst van USB
- via Audio-Midi configuratie al gecheckt of geluid op 48 kHz staat, dat klopt
Update: een test: ga naar Hulpprogramma's > Audio Midi Setup. Kies daar zonder meer voor 48 kHz als sampling Frequentie ipv. 44,1 kHz. Herstart en reverifiëer deze frequentie.
sudo launchctl stop com.apple.audio.coreaudiod && sudo launchctl start com.apple.audio.coreaudiod
or, using the newer launchctl syntax: sudo launchctl kickstart -kp system/com.apple.audio.coreaudiod
Ik heb de voorgestelde aanpassing gedaan Hulpprogramma's > Audio Midi Setup. Kies daar zonder meer voor 48 kHz Dat leek niet te helpenDaarna de volgende actie gedaan, dat werkte gelukkig welIn Terminal het volgende commando uitgevoerdCode: [Selecteer]sudo launchctl stop com.apple.audio.coreaudiod && sudo launchctl start com.apple.audio.coreaudiodDaarna een reboot, probleem opgelostPS.Zie ook een alternatieve route voor Big Sur deze link